MANUALplus 620




    MC main computer
    Integrated operating panel and 12.1-inch TFT color flat-panel display

    CC or UEC controller units

    Machine operating panel with 36 exchangeable snap-on keys as well as spindle and feed rate override potentiometers

    Operating system

    HEROS 5 real-time operating system for machine control

    NC program memory

    1.8 GB (on compact flash memory card CFR)

    Input resolution and
    display step

    X axis: 0.5 µm, diameter: 1 µm

    U, V, W, Y, Z axis: 1 µm

    B, C1/C2 axis: 0.001°


    Straight line: in 2 principal axes (max. ±100 m), optional in 3 principal axes

    Circle: in 2 axes (radius max. 999 m), optional additional linear interpolation of the third axis

    C1/C2 axis: interpolation of X and Z linear axes with the C1/C2 axis (option)

    Feed rate

    mm/min or mm/rev

    Constant surface speed

    Max. feed rate (60 000/pole pairs × ball screw pitch) at fPWM = 5000 Hz


    Maximum 60 000 rpm (with 2 pole pairs)

    Axis feedback control

    Integrated digital drive control for synchronous and asynchronous motors

    Position loop resolution: Signal period of the position encoder/1024

    Cycle time of position controller: 0.2 ms

    Cycle time of speed controller: 0.2 ms

    Cycle time of current controller: minimum 0.05 ms

    Error compensation

    Linear and nonlinear axis error, backlash, reversal peaks during circular movements

    Static friction

    Data interfaces

    Gigabit Ethernet interface 1000BASE-T

    3 x USB (1 x front USB 2.0; 2 x rear USB 3.0)


    Fast and simple troubleshooting through integrated diagnostic aids

    Ambient temperature

    Operation: In electrical cabinet: 5 °C to 40 °C
    In operating panel: 0 °C to 50 °C

    Storage: –20 °C to 60 °C